ELECTRONIC STATION CABINET REPAIR (cont)
For replacement of slide track or
cabinet frame, do steps b and c
For replacement of slide on
an electric assembly, do step d.
For defective slide track on bay
cabinet frame (8), remove two
screws (9), lockwashers (10), and
four washers (11) from rear of
left or right slide track (12).
Remove two screws (13), lockwash-
ers (14), and washers (15) from
front of slide track (12).
Remove slide track.
For defective slide on an assem-
bly, remove left or right defec-
tive slide (16) by removing
attaching screws (17) as shown
Install in reverse order of
END OF TASK